DIN Non-Rising Stem Resilient-Seated Gate Valve Manufacturers

We supply Stainless Steel Filling Valve.The HISPEED® Stainless Steel Filling Valves are designed and manufactured to provide maximum service life and dependability.The HISPEED® Stainless Steel Filling Valves may be used in commercial and industrial applications,including Beer drink,Printing and dyeing,Air separation,Pharmaceutical, Filling,Chemical industry,Sterilization,Foam equipment Environmental protection etc.Choose HISPEED® Stainless Steel Filling Valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.

Hispeed External Chemical Hydraulic Valve is classified as an external self-closing stop valve and is widely used on DOT407 and 412 cargo tanks. This is a robust and proven valve that satisfies the many requirements of the chemical transportation industry. The 316 stainless steel construction with optional Hastelloy® overlay and replaceable Teflon™ seat make this valve a versatile and reliable workhorse for any fleet.This valve does NOT include a sacrificial shear section;therefore, the cargo tank must have adequate accident damage protection to shield the valve as specified in 49CFR §178.345-8.The hydraulic actuator has a ¼” NPT inlet port and is specifically designed to completely isolate hydraulic fluid from cargo tank and piping. Hydraulic leaks are contained in the piston cylinder and will drain to the exterior of the valve through the indicator weep holes as an alert for repair.Two indicator pins are located on the bottom of the piston cylinder and move in relation to the disc. The pins can be used as a push point to manually jack open the valve.

As the professional manufacture, we would like to provide you Hispeed® STAINLESS STEEL GROOVED END FITTINGS TEE. And we will offer you the best after-sale service and timely delivery. The Hispeed Model SS-10 and SS-20 stainless steel grooved fittings are investment cast in sizes 1" - 8"; SS-11 is investment cast in sizes 1” – 10”; and SS-60 are investment cast in sizes 1”-12”. These fittings are supplied in ASTM A351 or A743 austenitic grades CF8 (304) and CF8M (316). Materials are in compliance with NSF/ANSI 372 for potable water service applications. In addition fittings are also available on request in CF3M (316L), 316Ti, 2205 Duplex, 2507 Super Duplex and ASTM CK-3MCuN (UNS J93245) the cast equivalent to 254SMO* to meet your specific service requirements. All cast fittings feature full flow characteristics and are designed to the same C - E dimensions of standard ductile iron grooved fittings.

We supply PN16 Pressure Reducing Valve.The Pressure Reducing Valves reduce a higher inlet pressure to a lower outlet pressure.The Pressure Reducing Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The Pressure Reducing Valves features a PN16 flange or a groove, easy installation and accessibility. We are expecting to become your long term partner in China.

We supply Single Orifice Air Relief Valve.The HISPEED® air vacuum valves are designed to discharge air during the filling or charging of the system and to admit air into the system during system drainage, valve or pump shut-off or at water column separation. We also offer a range of air release valves and combination air valves combining the functions of an air release valve and an air vacuum valve. The HISPEED® air vacuum valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® air vacuum valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.

As the professional manufacture, we would like to provide you high quality Hispeed® 300PSI Non-Rising Stem Resilient-Seated Gate Valve. And we will offer you the best after-sale service and timely delivery. 300PSI Non-Rising Stem Resilient-Seated Gate Valve.The gate valve provides full flow with minimal pressure drop. The gate valve is designed to be the main control valve in an automatic fire sprinkler system. The gate valve features a Class 125 flange, flat face end connection for easy installation and accessibility. We are expecting to become your long term partner in China.