Pressure Balancing Valves Manufacturers

We supply 300PSI Ductile Iron Y-Strainer(Grooved End).The HISPEED® 300PSI Ductile Iron Y-Strainers(Grooved End) may be used in commercial and industrial applications, including water supply, waste water, gas supply, fire protection, HVAC and irrigation.Choose HISPEED® 300PSI Ductile Iron Y-Strainers(Grooved End) for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.

We supply Cast Steel Pump Control Valve.The HISPEED® Pump Control Valve is a designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. The pump starts against a closed valve. When the pump is started, the solenoid control is energized and the valve begins to open slowly, gradually increasing line pressure to full pumping head. When the pump is signaled to shut-off, the solenoid control is de-energized and the valve begins to close slowly, gradually reducing flow while the pump continues to run. Should a power failure occur, a built-in, lift-type check valve closes the moment flow stops, preventing reverse flow regardless of solenoid or diaphragm assembly position. The HISPEED® Pump Control Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® Pump Control Valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.

We supply Roll Grooving Machines(Auto Operated).The HISPEED® Roll Grooving Machines(Auto Operated) are designed to groove pipe ends. They are powered by gear reducing motor featuring integral hydraulic pump structure and groove depth limitation device, so to ensure high quality grooves. We provides auto operated roll grooving machine in perfect quality..We are expecting to become your long term partner in China.

Hispeed External Chemical Hydraulic Valve is classified as an external self-closing stop valve and is widely used on DOT407 and 412 cargo tanks. This is a robust and proven valve that satisfies the many requirements of the chemical transportation industry. The 316 stainless steel construction with optional Hastelloy® overlay and replaceable Teflon™ seat make this valve a versatile and reliable workhorse for any fleet.This valve does NOT include a sacrificial shear section;therefore, the cargo tank must have adequate accident damage protection to shield the valve as specified in 49CFR §178.345-8.The hydraulic actuator has a ¼” NPT inlet port and is specifically designed to completely isolate hydraulic fluid from cargo tank and piping. Hydraulic leaks are contained in the piston cylinder and will drain to the exterior of the valve through the indicator weep holes as an alert for repair.Two indicator pins are located on the bottom of the piston cylinder and move in relation to the disc. The pins can be used as a push point to manually jack open the valve.

As the professional manufacture, we would like to provide you Hispeed® 300PSI Wet System Valve. We supply 300PSI Wet System Valve.The Wet System valve works as a check valve by preventing the reverse flow of water from the system piping to the water supply. The valve is trimmed with a water bypass line,which has an in-line swing check valve. The bypass line allows pressure surges to enter the system and to be trapped above the alarm check valve's clapper without the clapper lifting and causing false alarms.When significant flow of water occurs, such as from an open sprinkler, the valve's clapper lifts and allows water to enter the system. Simultaneously, water enters an intermediate chamber, which allows the water to activate an alarm either through a water motor alarm or through a water pressure alarm. These alarms continue to sound until the flow of water is stopped.We are expecting to become your long term partner in China.

As the professional manufacture, we would like to provide you Hispeed® DIN PN16 Rising Stem Resilient-Seated(OS and Y) Gate Valve. We supply DIN PN16 Rising Stem Resilient-Seated(OS and Y) Gate Valve. The gate valve provides full flow with minimal pressure drop. The gate valve is designed to be the main control valve in an automatic fire sprinkler system. The gate valve features a PN16 flange, raised face end connection for easy installation and accessibility. Outside screw and yoke (OS and Y) gate valves are recommended when positive shutoff and a quick visual indicator of open/closed position is required. This valve features a pre-grooved stem for tamper switch mounting. It is listed by Underwriters Laboratories of the FM Approved.We are expecting to become your long term partner in China.