Stainless Steel Gate Valve Manufacturers

We supply Cast Steel Pump Control Valve.The HISPEED® Pump Control Valve is a designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. The pump starts against a closed valve. When the pump is started, the solenoid control is energized and the valve begins to open slowly, gradually increasing line pressure to full pumping head. When the pump is signaled to shut-off, the solenoid control is de-energized and the valve begins to close slowly, gradually reducing flow while the pump continues to run. Should a power failure occur, a built-in, lift-type check valve closes the moment flow stops, preventing reverse flow regardless of solenoid or diaphragm assembly position. The HISPEED® Pump Control Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® Pump Control Valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.

We supply Cap.The HISPEED® Cap can be applied to water treatment and drinking water,oil and gas,heating&power,HAVC system,medicine&food and so on. We are specialized in providing stainless steel press fittings system solutions and products for pipelines.We are expecting to become your long term partner in China.

Buy Non-Rising Stem Resilient-Seated(NRS) Gate Valve(Grooved End) which is of high quality directly with low price. We supply Non-Rising Stem Resilient-Seated(NRS) Gate Valve(Grooved End).The gate valve provides full flow with minimal pressure drop. The gate valve is designed to be the main control valve in an automatic fire sprinkler system. The gate valve features a AWWA C606 Groove, grooved end connection for easy installation and accessibility. We are expecting to become your long term partner in China.

We supply Elbow with Plain.The HISPEED® Elbow with Plain can be applied to water treatment and drinking water,oil and gas,heating&power,HAVC system,medicine&food and so on. We are specialized in providing stainless steel press fittings system solutions and products for pipelines.We are expecting to become your long term partner in China.

Hispeed External Chemical Hydraulic Valve is classified as an external self-closing stop valve and is widely used on DOT407 and 412 cargo tanks. This is a robust and proven valve that satisfies the many requirements of the chemical transportation industry. The 316 stainless steel construction with optional Hastelloy® overlay and replaceable Teflon™ seat make this valve a versatile and reliable workhorse for any fleet.This valve does NOT include a sacrificial shear section;therefore, the cargo tank must have adequate accident damage protection to shield the valve as specified in 49CFR §178.345-8.The hydraulic actuator has a ¼” NPT inlet port and is specifically designed to completely isolate hydraulic fluid from cargo tank and piping. Hydraulic leaks are contained in the piston cylinder and will drain to the exterior of the valve through the indicator weep holes as an alert for repair.Two indicator pins are located on the bottom of the piston cylinder and move in relation to the disc. The pins can be used as a push point to manually jack open the valve.

You are welcomed to come to our factory to buy the latest selling, low price, and high-quality Hispeed® 300PSI Pressure Reducing Valve. We supply 300PSI Pressure Reducing Valve.The Pressure Reducing Valves reduce a higher inlet pressure to a lower outlet pressure.The Pressure Reducing Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The Pressure Reducing Valves features a Class 125 flange or a groove, easy installation and accessibility. We are expecting to become your long term partner in China.