Cast Steel Check Valve Manufacturers

As the professional manufacture, we would like to provide you high quality Hispeed® PN16 Pressure Relief Valve. We supply PN16 Pressure Relief Valve.The Pressure Relief Valves limit inlet pressure by relieving excess pressure and prevent pipe line pressure from rising to maximun.The Pressure Relief Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The Pressure Reducing Valves features a PN16 flange or a groove, easy installation and accessibility. We are expecting to become your long term partner in China.

High quality Hispeed® Butterfly Valve(Grooved) is offered by China manufacturer Hispeed. We supply Butterfly Valve(Grooved).The butterfly valves are indicating type valves designed for use in fire protection systems where a visual indication of open valve condition is required. They are used, for example, as system, sectional and pump water control valves.The butterfly valve features a AWWA C606 Groove, grooved end connection for easy installation and accessibility. We are expecting to become your long term partner in China.

As the professional manufacture, we would like to provide you Hispeed® 300PSI Y-Strainer(Grooved End). We supply 300PSI Y-Strainer(Grooved End).The Y-Strainers are low friction loss Y-Strainers designed for use in fire protection systems.The Y-Strainers are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The Y-Strainer features a groove, easy installation and accessibility. We are expecting to become your long term partner in China.

We supply high quality Hispeed® Cast Steel Remote Control Float Valve.The HISPEED® Float Control Valve or Flow Level Control Valve is a non-modulating valve.Float Control Valve is used to maintain a pre-set point water level,The float pilot will shut off when water level rises to high level, and open.When water level drops.The float ball can be mounted separately in the water tank or with the main valve. The HISPEED® Float Control Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® Float Control Valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.

As the professional manufacture, we would like to provide you Hispeed® 300PSI Wet System Valve. We supply 300PSI Wet System Valve.The Wet System valve works as a check valve by preventing the reverse flow of water from the system piping to the water supply. The valve is trimmed with a water bypass line,which has an in-line swing check valve. The bypass line allows pressure surges to enter the system and to be trapped above the alarm check valve's clapper without the clapper lifting and causing false alarms.When significant flow of water occurs, such as from an open sprinkler, the valve's clapper lifts and allows water to enter the system. Simultaneously, water enters an intermediate chamber, which allows the water to activate an alarm either through a water motor alarm or through a water pressure alarm. These alarms continue to sound until the flow of water is stopped.We are expecting to become your long term partner in China.

Hispeed External Chemical Hydraulic Valve is classified as an external self-closing stop valve and is widely used on DOT407 and 412 cargo tanks. This is a robust and proven valve that satisfies the many requirements of the chemical transportation industry. The 316 stainless steel construction with optional Hastelloy® overlay and replaceable Teflon™ seat make this valve a versatile and reliable workhorse for any fleet.This valve does NOT include a sacrificial shear section;therefore, the cargo tank must have adequate accident damage protection to shield the valve as specified in 49CFR §178.345-8.The hydraulic actuator has a ¼” NPT inlet port and is specifically designed to completely isolate hydraulic fluid from cargo tank and piping. Hydraulic leaks are contained in the piston cylinder and will drain to the exterior of the valve through the indicator weep holes as an alert for repair.Two indicator pins are located on the bottom of the piston cylinder and move in relation to the disc. The pins can be used as a push point to manually jack open the valve.