CS Check Valve Manufacturers

The following is the introduction of high quality Hispeed® PN16 Silent Check Valve, We supply PN16 Silent Check Valve.The Check Valves are low friction loss check valves designed for use in fire protection systems. These are used in fire protection systems to allow water-flow in one direction only. Typical applications include connections between public water supplies and private fire systems, at the discharge from fire pumps, at gravity tank connections and at fire department pumper connections.We are expecting to become your long term partner in China.

We supply Equal Coupling.The HISPEED® Equal Coupling can be applied to water treatment and drinking water,oil and gas,heating&power,HAVC system,medicine&food and so on. We are specialized in providing stainless steel press fittings system solutions and products for pipelines.We are expecting to become your long term partner in China.

We supply Hispeed® Ductile Iron Knife Gate Valve.Its application range is very wide, from coal mining in mines and power plants, slag discharge, slag discharge, to urban sewage treatment; from cement and paper mill slurry transportation to food, sanitation, medicine and other professional pipelines. The ultra-thin design of the Knife Gate Valve completely solves the ordinary gate valve, the slab gate valve, the ball valve, the globe valve, the regulating valve, the butterfly valve and the like with the advantages of small volume, light weight, small flow resistance, no slag accumulation, easy installation and easy disassemble. The flow resistance is large, occupying space, easy to accumulate slag, and difficult to install and maintain. Therefore, a large number of general-purpose cut-off gates and regulating gates are replaced by Knife Gate Valve. We are expecting to become your long term partner in China.

We supply Cast Steel Pump Control Valve.The HISPEED® Pump Control Valve is a designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. The pump starts against a closed valve. When the pump is started, the solenoid control is energized and the valve begins to open slowly, gradually increasing line pressure to full pumping head. When the pump is signaled to shut-off, the solenoid control is de-energized and the valve begins to close slowly, gradually reducing flow while the pump continues to run. Should a power failure occur, a built-in, lift-type check valve closes the moment flow stops, preventing reverse flow regardless of solenoid or diaphragm assembly position. The HISPEED® Pump Control Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® Pump Control Valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.

You can rest assured to buy Hispeed® PN16 Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve from our factory. We supply PN16 Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve.The Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve provides full flow with minimal pressure drop. The Gate Valve features a PN16 flange, raised face end connection for easy installation and accessibility. The HISPEED® flanged ductile iron gate valve may be used in commercial and industrial applications, including water supply, waste water, gas supply, fire protection, HVAC and irrigation.Choose HISPEED® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.

As the professional manufacture, we would like to provide you Hispeed® Rising Stem Resilient-Seated(OS and Y) Ductile Iron Gate Valve(Grooved End). We supply Rising Stem Resilient-Seated(OS and Y) Ductile Iron Gate Valve(Grooved End).The Rising Stem Resilient-Seated(OS and Y) Ductile Iron Gate Valve provides full flow with minimal pressure drop. The Gate Valve features a grooved,easy installation and accessibility. Rising Stem(OS and Y) Gate Valves are recommended when positive shutoff and a quick visual indicator of open/closed position is required. The OS and Y configuration protects the stem threads from contact with the media. The HISPEED® grooved ductile iron gate valve may be used in commercial and industrial applications, including water supply, waste water, gas supply, fire protection, HVAC and irrigation.Choose HISPEED® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.