Straight Equal Male Tube Connector Brass Sliding Fitting Manufacturers

Hispeed External Chemical Hydraulic Valve is classified as an external self-closing stop valve and is widely used on DOT407 and 412 cargo tanks. This is a robust and proven valve that satisfies the many requirements of the chemical transportation industry. The 316 stainless steel construction with optional Hastelloy® overlay and replaceable Teflon™ seat make this valve a versatile and reliable workhorse for any fleet.This valve does NOT include a sacrificial shear section;therefore, the cargo tank must have adequate accident damage protection to shield the valve as specified in 49CFR §178.345-8.The hydraulic actuator has a ¼” NPT inlet port and is specifically designed to completely isolate hydraulic fluid from cargo tank and piping. Hydraulic leaks are contained in the piston cylinder and will drain to the exterior of the valve through the indicator weep holes as an alert for repair.Two indicator pins are located on the bottom of the piston cylinder and move in relation to the disc. The pins can be used as a push point to manually jack open the valve.

We supply Hispeed® Ductile Iron Knife Gate Valve.Its application range is very wide, from coal mining in mines and power plants, slag discharge, slag discharge, to urban sewage treatment; from cement and paper mill slurry transportation to food, sanitation, medicine and other professional pipelines. The ultra-thin design of the Knife Gate Valve completely solves the ordinary gate valve, the slab gate valve, the ball valve, the globe valve, the regulating valve, the butterfly valve and the like with the advantages of small volume, light weight, small flow resistance, no slag accumulation, easy installation and easy disassemble. The flow resistance is large, occupying space, easy to accumulate slag, and difficult to install and maintain. Therefore, a large number of general-purpose cut-off gates and regulating gates are replaced by Knife Gate Valve. We are expecting to become your long term partner in China.

We supply Dry Sprinklers.The HISPEED® Dry sprinklers are designed for use in areas where the sprinkler may be subjected to freezing conditions. Dry sprinklers may be used in dry systems, where the entire area being protected is subject to freezing, and wet systems, where a small portion of the area being protected is subject to freezing. We are expecting to become your long term partner in China.

You can rest assured to buy Hispeed® PN16 Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve from our factory. We supply PN16 Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve.The Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve provides full flow with minimal pressure drop. The Gate Valve features a PN16 flange, raised face end connection for easy installation and accessibility. The HISPEED® flanged ductile iron gate valve may be used in commercial and industrial applications, including water supply, waste water, gas supply, fire protection, HVAC and irrigation.Choose HISPEED® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.

We supply Foot Valve.The HISPEED® Foot Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® Foot Valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.

As a professional high quality Hispeed® 300PSI Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve manufacture, you can rest assured to buy 300PSI Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve from our factory and we will offer you the best after-sale service and timely delivery. Rich experience QA can help you audit the factory or check the goods quality before shipping. We supply 300PSI Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve.The Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve provides full flow with minimal pressure drop. The Gate Valve features a Class 125 flange, flat face end connection for easy installation and accessibility. The HISPEED® flanged ductile iron gate valve may be used in commercial and industrial applications, including water supply, waste water, gas supply, fire protection, HVAC and irrigation.Choose HISPEED® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.