Cast Steel Y-Strainer Manufacturers

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Cast Steel Y-Strainer,Stainless Steel Y-Strainer,CS Y-Strainer,SS Y-Strainer,CS Y Strainer, We look forward to providing you with our goods while in the in close proximity to long term, and you will discover our quotation is extremely realistic as well as high-quality of our solutions is incredibly outstanding!
Cast Steel Y-Strainer, We pay high attention to customer service, and cherish every customer. Now we have maintained a strong reputation in the industry for many years. We are honest and work on building a long-term relationship with our customers.

Hot Products

  • Cast Steel Pump Control Valve

    Cast Steel Pump Control Valve

    We supply Cast Steel Pump Control Valve.The HISPEED® Pump Control Valve is a designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. The pump starts against a closed valve. When the pump is started, the solenoid control is energized and the valve begins to open slowly, gradually increasing line pressure to full pumping head. When the pump is signaled to shut-off, the solenoid control is de-energized and the valve begins to close slowly, gradually reducing flow while the pump continues to run. Should a power failure occur, a built-in, lift-type check valve closes the moment flow stops, preventing reverse flow regardless of solenoid or diaphragm assembly position. The HISPEED® Pump Control Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® Pump Control Valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.
  • Chemical Hydraulic Valve

    Chemical Hydraulic Valve

    Hispeed External Chemical Hydraulic Valve is classified as an external self-closing stop valve and is widely used on DOT407 and 412 cargo tanks. This is a robust and proven valve that satisfies the many requirements of the chemical transportation industry. The 316 stainless steel construction with optional Hastelloy® overlay and replaceable Teflon™ seat make this valve a versatile and reliable workhorse for any fleet.This valve does NOT include a sacrificial shear section;therefore, the cargo tank must have adequate accident damage protection to shield the valve as specified in 49CFR §178.345-8.The hydraulic actuator has a ¼” NPT inlet port and is specifically designed to completely isolate hydraulic fluid from cargo tank and piping. Hydraulic leaks are contained in the piston cylinder and will drain to the exterior of the valve through the indicator weep holes as an alert for repair.Two indicator pins are located on the bottom of the piston cylinder and move in relation to the disc. The pins can be used as a push point to manually jack open the valve.
  • 300PSI Ductile Iron Y-Strainer(Grooved End)

    300PSI Ductile Iron Y-Strainer(Grooved End)

    We supply 300PSI Ductile Iron Y-Strainer(Grooved End).The HISPEED® 300PSI Ductile Iron Y-Strainers(Grooved End) may be used in commercial and industrial applications, including water supply, waste water, gas supply, fire protection, HVAC and irrigation.Choose HISPEED® 300PSI Ductile Iron Y-Strainers(Grooved End) for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.
  • Dry Sprinklers

    Dry Sprinklers

    We supply Dry Sprinklers.The HISPEED® Dry sprinklers are designed for use in areas where the sprinkler may be subjected to freezing conditions. Dry sprinklers may be used in dry systems, where the entire area being protected is subject to freezing, and wet systems, where a small portion of the area being protected is subject to freezing. We are expecting to become your long term partner in China.
  • Ductile Iron Pressure Reducing Valve

    Ductile Iron Pressure Reducing Valve

    We supply Hispeed® Ductile Iron Pressure Reducing Valve.The HISPEED® Ductile Iron Pressure Reducing Valves reduce a higher inlet pressure to a lower outlet pressure.The Ductile Iron Pressure Reducing Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The Pressure Reducing Valve features a flange or a groove, easy installation and accessibility. We are expecting to become your long term partner in China.
  • DIN PN16 Non-Rising Stem Resilient-Seated(NRS) Gate Valve

    DIN PN16 Non-Rising Stem Resilient-Seated(NRS) Gate Valve

    As the professional manufacture, we would like to provide you high quality Hispeed® DIN PN16 Non-Rising Stem Resilient-Seated(NRS) Gate Valve. And we will offer you the best after-sale service and timely delivery. We supply DIN PN16 Non-Rising Stem Resilient-Seated(NRS) Gate Valve.The gate valve provides full flow with minimal pressure drop. The gate valve is designed to be the main control valve in an automatic fire sprinkler system. The gate valve features a PN16 flange, raised face end connection for easy installation and accessibility. We are expecting to become your long term partner in China.

Send Inquiry