Vip Flanged Silent Check Valvesa Manufacturers

You can rest assured to buy Hispeed® PN16 Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve from our factory. We supply PN16 Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve.The Non-Rising Stem Resilient-Seated(NRS) Ductile Iron Gate Valve provides full flow with minimal pressure drop. The Gate Valve features a PN16 flange, raised face end connection for easy installation and accessibility. The HISPEED® flanged ductile iron gate valve may be used in commercial and industrial applications, including water supply, waste water, gas supply, fire protection, HVAC and irrigation.Choose HISPEED® gate valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications.We are expecting to become your long term partner in China.

We supply Cast Steel Pump Control Valve.The HISPEED® Pump Control Valve is a designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. The pump starts against a closed valve. When the pump is started, the solenoid control is energized and the valve begins to open slowly, gradually increasing line pressure to full pumping head. When the pump is signaled to shut-off, the solenoid control is de-energized and the valve begins to close slowly, gradually reducing flow while the pump continues to run. Should a power failure occur, a built-in, lift-type check valve closes the moment flow stops, preventing reverse flow regardless of solenoid or diaphragm assembly position. The HISPEED® Pump Control Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The HISPEED® Pump Control Valve features a flange, easy installation and accessibility. We are expecting to become your long term partner in China.

The following is the introduction of high quality Hispeed® PN16 Wet System Valve, We supply PN16 Wet System Valve.The Wet System valve works as a check valve by preventing the reverse flow of water from the system piping to the water supply. The valve is trimmed with a water bypass line,which has an in-line swing check valve. The bypass line allows pressure surges to enter the system and to be trapped above the alarm check valve's clapper without the clapper lifting and causing false alarms.When significant flow of water occurs, such as from an open sprinkler, the valve's clapper lifts and allows water to enter the system. Simultaneously, water enters an intermediate chamber, which allows the water to activate an alarm either through a water motor alarm or through a water pressure alarm. These alarms continue to sound until the flow of water is stopped.We are expecting to become your long term partner in China.

As the professional manufacture, we would like to provide you Hispeed® DIN PN16 Rising Stem Resilient-Seated(OS and Y) Gate Valve. We supply DIN PN16 Rising Stem Resilient-Seated(OS and Y) Gate Valve. The gate valve provides full flow with minimal pressure drop. The gate valve is designed to be the main control valve in an automatic fire sprinkler system. The gate valve features a PN16 flange, raised face end connection for easy installation and accessibility. Outside screw and yoke (OS and Y) gate valves are recommended when positive shutoff and a quick visual indicator of open/closed position is required. This valve features a pre-grooved stem for tamper switch mounting. It is listed by Underwriters Laboratories of the FM Approved.We are expecting to become your long term partner in China.

We supply high quality Hispeed® Ductile Iron Pressure Relief Valve.The HISPEED® Ductile Iron Pressure Relief Valves limit inlet pressure by relieving excess pressure and prevent pipe line pressure from rising to maximum.The Ductile Iron Pressure Relief Valves are designed for installation in the water supply connection to sprinkler, deluge, foam systems, or standpipe fire protection systems.The Ductile Iron Pressure Relief Valve features a flange or a groove, easy installation and accessibility. We are expecting to become your long term partner in China.

The following is the introduction of high quality Hispeed® PN16 Silent Check Valve, We supply PN16 Silent Check Valve.The Check Valves are low friction loss check valves designed for use in fire protection systems. These are used in fire protection systems to allow water-flow in one direction only. Typical applications include connections between public water supplies and private fire systems, at the discharge from fire pumps, at gravity tank connections and at fire department pumper connections.We are expecting to become your long term partner in China.